ACCESSORIES

Male to male snap-on brass coupler

Used to join 2 x drink water hoses with snap fittings.

If you use an external water filter, your long hose connects to the filter and you need a short length of drink water hose to connect the filter to your caravan/motorhome water inlet. 
This hose is the same high quality as our longer hoses, and takes up very little room. No need to keep on Multi-Reel, it's short enough to roll and store as you see in the product photo.

If you use an external water filter, your long hose connects to the filter and you need a short length of drink water hose to connect the filter to your caravan/motorhome water inlet. 
This hose is the same high quality as our longer hoses, and takes up very little room. No need to keep on Multi-Reel, it's short enough to roll and store as you see in the product photo.

Store on your Flat Out Compact Multi-Reel. Storing without reel will void warranty.

Store on your Flat Out Compact Multi-Reel. Storing without reel will void warranty.

If your drink water pressure inlet is horizontal use this to convert to downward before the snap on tap-adaptor for optimum hose smoothness.

Repair Kit: 2x nut and tail snap-fittings, 2x rubber sleeves, 2x hose clamps, 1x hose coupling joiner

Our hoses are pretty darn hard to break, but if you're one of those people who like to be extra prepared, you can carry a repair kit to get you out of trouble should you have a problem out bush. 
How to use video here.

Repair Kit: 1x brass snap-fitting, 1x rubber sleeve, 1x hose clamp

Our hoses are pretty darn hard to break, but if you're one of those people who like to be extra prepared, you can carry a repair kit to get you out of trouble should you have a problem out bush. How to use video here.

This is used to repair an issue in the Flat Out Drink Water Hose that is close to an end (you will discard the off-cut). Should your issue be central in the hose, consider the Join repair kit so you can keep both ends of the hose. 

30cm AS4020 Potable water safe solid hose with snap-on connector. 

Some Caravans and Motorhomes have water tanks without pressure connections. For these inserting a short length of open hose is the simplest way of filling them (see bottom of drink water page for instructions) 
Connect this product to your Flat Drink Water hose to allow easy insertion to your tank with a brass joiner (P7).

Standard brass tap adaptor for ¾in & 1in BSP threaded garden taps to male snap-on

BSP female threaded with ¾in and 1in options with swivel head and downward pointing male snap-on adaptor brass

½inch male NPT thread to 1/2inch male BSP brass converter.

Attach to caravans/motor homes with a USA style female water inlet. On BSP end you can attach P4 or P8 or any standard Australian tap adaptor.

Threaded USA male water inlet connector with swivel head downward facing snap-on brass

Use to attach your Flat Out hose to your USA style caravan/motor home water inlet. The downward thread with swivel is the ultimate connection setup allowing for a smooth angled connection down to your excess hose coiled below.

Replacement or extension 25mm Sullage hose - 3m long.

Best stored on Multi-Reel or Compact Multi-Reel for user friendliness however can be stored rolled as shown if you keep it just for the odd time you need an extension.

 

Includes one short length of 25mm hose and barbed elbow to point the outflow downwards.

This item is used to fix your sullage hose correctly if your van has a 25mm horizontal grey water outlet. Essentially the same as the drain adaptor included in 25mm Sullage on Multi-Reel purchase but for a different purpose.

 

Connect our sullage hose seamlessly to your 1 inch Female threaded BSP sullage outlet

Some caravans or motor homes have a threaded connection. Instructions for measuring your outlet can be found in this document.

Barbed adaptor: one end 25mm the other 32mm. Contains short length of 32mm hose to allow easy connection to a 32mm waste outlet for a 25mm hose. 

This item would be useful if you are interested in our most compact sullage model C3 (6m 25mm hose) yet your outlet is 32mm OD. We only recommend downscaling to a 25mm hose if you have a holding tank to buffer high flow times. Otherwise we suggest you matcvh your hose to your outlet and use the M4 allowing maximum flow rates.

PVC elbow barbed for right-angled connection between 2 lengths of 25mm sullage hose

One of these is provided with your hose along with a short length of hose to make a drain adaptor. Purchase an additional one if you wish to have the option of hard corner turning when laying out your sullage hose. If you have a horizontal sullage outlet you can cut a short length of hose and use it to attach this elbow to your outlet creating a downward flow to attach your main hose, this will increase flow.

Spare or replacement end plug for your 25mm sullage hose

2 plugs are provided witn your original sullage purchase.

PVC joiner barbed at both ends used to connect 2 lengths of sullage together.

One is provided with your purchase to achieve the full 9m length of hose. If you wish to cut your hose into shorter lengths, carry extra joiners to achieve the full length.

Replacement 32mm sullage hose 3m long

Best used and stored on your Multi-Reel for ease of operation and cleanliness, use without Multi-Reel won't void warranty but it will be more annoying and less tidy/clean.

Includes one short length of 32mm hose and barbed elbow to point the outflow downwards.

Identical to the included drain adaptor this item is used as an easy fix 90 degree connector if your van has a horizontal grey water outlet.

Adaptor and short length of 32mm hose to connect to van for expanding to allow smaller hose on larger outlet useful when space saving is essential

For use if you have a 40 mm internal diameter PVC pipe Sullage outlet on your van. This 40 mm external diameter sleeve with 32mm Barbed elbow joiner allows downward connection of your 32mm Flat Out Sullage hose.

Spare or replacement end plug for your 32mm sullage hose

2 plugs are provided witn your original sullage purchase.

PVC elbow barbed for right-angled connection between 2 lengths of 32mm sullage hose

One of these is provided with your hose along with a short length of hose to make a drain adaptor.

Purchase an additional one if you wish to have have the option of hard corner turning when laying out your sullage hose.

If you have a horizontal sullage outlet you can cut a short length of hose and use it to attach this elbow to your outlet creating a downward flow to attach your main hose to, this will increase flow.

PVC joiner barbed at both ends used to connect 2 lengths of 32mm sullage hose together.

One is provided with your purchase do achieve the full 9m length of hose. If you wish to cut your hose into shorter lengths, carry extra joiners to achieve the full length.

Should you have lost your Compact Multi-Reel guides, you can replace them rather than replacing the entire reel.

Should you have lost your Multi-Reel guides, you can replace them rather than replacing the entire reel.

Should you have lost your reel handle, you can replace it rather than replacing the entire reel.